The material I used was a 15′ x 4′ drop cloth that I purchased at Wal-Mart *5H910 Canvas Drop Cloth for $14.99. That is a lot of material.
Here is the list for what you will need for this project.
canvas drop cloth (washed and prepped)
wax paper
printer
printer paper
adhesive spray
painters tape
sponge brush
acrylic paint
My place mats measure 18 x 14 when finished.
I first cut out 4 sets or 8 pieces measuring 20 x 16.
Once cut out take four of your pieces and these will be your tops for the placemat transfers.
Make sure to center the graphic on the fabric.
I measured out 1 inch from the widest point of the graphic. That is where I wanted my first line to be.
Important thing here is to take your time and think out each line spacing and copy the same for each side.
To get your third line you need to create a tape line the same width as the space between the wide line and the thin first line.
Once you have painted all the placemats then I seamed up all four sides except my 5-6 inch turning spot. Turn each placemat inside out and then iron the seams flat and remove all wrinkles.
These do take some time with the prep work of the canvas drop cloth and then the transfer of the image and painting of stripes, but I think they are well worth it.
COST OF PLACEMATS. $11.00 for 4-Placemats. I have enough fabric left over to make a couple of other things.
I will have some in my Etsy shop if you would rather forgo the time it takes to make them.
Don’t forget to pin this to your Pinterest Board. I would love for you to join me on PINTEREST. Great things are happening all the time over there.
I love hearing from you, so please leave a comment if you would like. I do enjoying reading them all and will reply.
Thanks for stopping by. I hope you enjoy your weekend!
Original article and pictures take http://www.hometalk.com/9955206/how-to-make-french-placemats site
Комментариев нет:
Отправить комментарий